NXP Semiconductors


Select site:

English

SA58640

Selection guide

Datasheet

SA58640
(Product Specification)
06-Apr-05, 15 pages, 77 kB

Download all documentation

General description

The SA58640 is a low-voltage monolithic FM IF system incorporating a mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector, logarithmic RSSI, voltage regulator and audio and RSSI opamps. The SA58640 is available in a 20-pin SSOP package.

Features

  • Low power consumption: 5.0 mA typical at 5 V
  • Mixer input to >100 MHz
  • Mixer conversion power gain of 17 dB at 45 MHz
  • Crystal oscillator effective to 100 MHz (LC oscillator or external oscillator can be used at higher frequencies)
  • 102 dB of IF amp/limiter gain
  • 2 MHz IF amp/limiter small signal bandwidth
  • Temperature compensated logarithmic RSSI with a 70 dB dynamic range
  • Low external component count; suitable for crystal/ceramic/LC filters
  • Audio output internal opamp
  • RSSI output internal opamp
  • Internal opamps with rail-to-rail outputs
  • ESD protection: Human body model 2 kV; robot model 200 V.

Products/packages

Type numberNorth American Type numberOrdering code (12NC)Product statusPackagePackingMarkingChemical contentLeadfree conversion date
SA58640DKSA58640DK9352 770 02112Volume productionSOT266-1
(SSOP20)
TubeStandard MarkingSA58640DK
week 12, 2005
SA58640DKSA58640DK-T9352 770 02118Volume productionSOT266-1
(SSOP20)
Reel Pack, SMD, 13"Standard MarkingSA58640DK
week 12, 2005

Pricing/ordering/availability

Type numberOrdering code(12NC)Indicative price/unit($)RegionDistributorIn stockOrder quantityInventory dateBuy onlineSamples
SA58640DK9352 770 02112  1.6300      not available
SA58640DK9352 770 02118  1.6300NADIGI-KEY CORPORATION2,500 1/8/2009Buy onlineOrder samples
   NADIGI-KEY CORPORATION4,086 1/8/2009Buy online 

Applications

  • Cordless phones.

Block diagrams/pinning

Design support

Support Documents

Disclaimer

The information published on product information pages of the www.nxp.com or www.semiconductors.com websites is an extract from product data sheets and is for information purposes only. For detailed information please check the most recent version of the relevant product data sheet as published on these websites. In the event of any conflict between product information pages and data sheets or deviations from information provided in the product data sheets on these product information pages, the information provided in the product data sheets shall prevail.


The product status of the product(s) described in the product data sheet may have changed since publication of the data sheet and therefore information in datasheets on product status may be outdated. The latest information on product status is published on the product information pages of the above-mentioned websites.


As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors, which will be used in future data sheets together with new contact details. In data sheets where the previous Philips references remain, please use the new links as shown below.


http://www.philips.semiconductors.com use http://www.nxp.com
http://www.semiconductors.philips.com use http://www.nxp.com (Internet)
sales.addresses@www.semiconductors.philips.com use salesaddresses@nxp.com (e-mail)

The copyright notice at the bottom of each page (or elsewhere in the document, depending on the version)
- © Koninklijke Philips Electronics N.V. (year). All rights reserved -
is replaced with:
- © NXP B.V. (year). All rights reserved.-


If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or phone (details via salesaddresses@nxp.com). Thank you for your cooperation and understanding.