NXP Semiconductors


Select site:

English

Datasheet

SA604A
(Product Specification)
07-Nov-97, 13 pages, 151 kB

Download all documentation

General description

The SA604A is an improved monolithic low-power FM IF system incorporating two limiting intermediate frequency amplifiers, quadrature detector, muting, logarithmic received signal strength indicator, and voltage regulator. The SA604A features higher IF bandwidth (25MHz) and temperature compensated RSSI and limiters permitting higher performance application compared with the SA604. The SA604A is available in a 16-lead SO (surface-mounted miniature) package.

Features

  • Low power consumption: 3.3mA typical
  • Temperature compensated logarithmic Received Signal Strength Indicator (RSSI) with a dynamic range in excess of 90dB
  • Two audio outputs - muted and unmuted
  • Low external component count; suitable for crystal/ceramic filters
  • Excellent sensitivity: 1.5µV across input pins (0.22µV into 50W matching network) for 12dB SINAD (Signal to Noise and Distortion ratio) at 455kHz
  • SA604A meets cellular radio specifications

Products/packages

Type numberNorth American Type numberOrdering code (12NC)Product statusPackagePackingMarkingChemical contentLeadfree conversion date
SA604AD/01SA604AD/019352 752 65112Volume productionSOT109-1
(SO16)
TubeStandard MarkingSA604AD/01
week 12, 2005
SA604AD/01SA604AD/01-T9352 752 65118Volume productionSOT109-1
(SO16)
Reel Pack, SMD, 13"Standard MarkingSA604AD/01
week 12, 2005

Pricing/ordering/availability

Type numberOrdering code(12NC)Indicative price/unit($)RegionDistributorIn stockOrder quantityInventory dateBuy onlineSamples
SA604AD/019352 752 65112  2.8700NAARROW ELECTRONICS150 1/8/2009Buy onlinenot available
   NAAVNET ELECTRONICS MARKETING3,720 1/8/2009Buy online 
   NADIGI-KEY CORPORATION1,081 1/8/2009Buy online 
   ASIAWPI3505001/08/2009Buy online 
SA604AD/019352 752 65118  2.8700NAARROW ELECTRONICS20,000 1/8/2009Buy onlinenot available
   NAMOUSER ELECTRONICS1,514 1/8/2009Buy online 

Applications

  • Cellular radio FM IF
  • High performance communications receivers
  • Intermediate frequency amplification and detection up to 25MHz
  • RF level meter
  • Spectrum analyzer
  • Instrumentation
  • FSK and ASK data receivers

Block diagrams/pinning

Design support

Support Documents

Disclaimer

The information published on product information pages of the www.nxp.com or www.semiconductors.com websites is an extract from product data sheets and is for information purposes only. For detailed information please check the most recent version of the relevant product data sheet as published on these websites. In the event of any conflict between product information pages and data sheets or deviations from information provided in the product data sheets on these product information pages, the information provided in the product data sheets shall prevail.


The product status of the product(s) described in the product data sheet may have changed since publication of the data sheet and therefore information in datasheets on product status may be outdated. The latest information on product status is published on the product information pages of the above-mentioned websites.


As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors, which will be used in future data sheets together with new contact details. In data sheets where the previous Philips references remain, please use the new links as shown below.


http://www.philips.semiconductors.com use http://www.nxp.com
http://www.semiconductors.philips.com use http://www.nxp.com (Internet)
sales.addresses@www.semiconductors.philips.com use salesaddresses@nxp.com (e-mail)

The copyright notice at the bottom of each page (or elsewhere in the document, depending on the version)
- © Koninklijke Philips Electronics N.V. (year). All rights reserved -
is replaced with:
- © NXP B.V. (year). All rights reserved.-


If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or phone (details via salesaddresses@nxp.com). Thank you for your cooperation and understanding.