NXP Semiconductors


Select site:

English

Datasheet

SA608
(Product Specification)
03-Nov-92, 14 pages, 118 kB

Download all documentation

Low voltage high performance mixer FM IF system

General description
Features
Products/packages
Chemical content
Pricing/ordering/availability
Samples
Applications
Block diagrams/pinning
Design support
Parametrics/similar products
Print/email

General description

The SA608 is a low voltage high performance monolithic FM IF system incorporating a mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector, logarithmic received signal strength indicator (RSSI), voltage regulator and audio and RSSI op amps. The SA608 is available in 20-lead dual-in-line plastic, 20-lead SOL (surface-mounted miniature package) and 20-lead SSOP package.

The SA608 was designed for portable communication applications and will function down to 2.7V. The RF section is similar to the famous NE605. The audio output is buffered. The RSSI output has an internal amplifier with the feedback pin accessible. The SA608 also has an extra limiter output. This signal is buffered from the output of the limiter and can be used to perform frequency check. This is accomplished by comparing a reference frequency with the frequency check signal using a comparator to a varactor or PLL at the oscillator inputs.

Features

  • Low power consumption: 3.5mA typical at 3V
  • Mixer input to >150MHz
  • Mixer conversion power gain of 17dB at 45MHz
  • XTAL oscillator effective to 150MHz (L.C. oscillator or external oscillator can be used at higher frequencies)
  • 102dB of IF Amp/Limiter gain
  • 2MHz limiter small signal bandwidth
  • Temperature compensated logarithmic Received Signal Strength Indicator (RSSI) with a 90dB dynamic range
  • Low external component count; suitable for crystal/ceramic/LC filters
  • Excellent sensitivity: 0.31µV into 50W matching network for 12dB SINAD (Signal to Noise and Distortion ratio) for 1kHz tone, 8kHz deviation with RF at 45MHz and IF at 455kHz
  • SA608 meets cellular radio specifications
  • Audio output internal op amp
  • RSSI output internal op amp
  • Buffered frequency check output
  • Internal op amps with rail-to-rail outputs
  • ESD protection:
    Human Body Model 2kV
    Robot Model 200V

Products/packages

Type numberNorth American Type numberOrdering code (12NC)Product statusPackagePackingMarkingChemical contentLeadfree conversion date
SA608DK/01SA608DK/01-T9352 752 88118Volume productionSOT266-1
(SSOP20)
Reel Pack, SMD, 13"Standard MarkingSA608DK/01
week 12, 2005
SA608DK/01SA608DK/019352 752 88112Volume productionSOT266-1
(SSOP20)
TubeStandard MarkingSA608DK/01
week 12, 2005

Pricing/ordering/availability

Type numberOrdering code(12NC)Indicative price/unit($)RegionDistributorIn stockOrder quantityInventory dateBuy onlineSamples
SA608DK/019352 752 88118  3.2400NADIGI-KEY CORPORATION1,706 1/8/2009Buy onlineOrder samples
SA608DK/019352 752 88112  3.2400NAFUTURE ELECTRONICS810 1/7/2009Buy onlinenot available

Applications

  • Portable cellular radio FM IF
  • Cordless phones
  • Narrow band cellular applications (NAMPS/NTACS)
  • RF level meter
  • Spectrum analyzer
  • Instrumentation
  • FSK and ASK data receivers
  • Log amps
  • Portable high performance communication receivers
  • Single conversion VHF receivers
  • Wireless systems

Design support

Support Documents

Disclaimer

The information published on product information pages of the www.nxp.com or www.semiconductors.com websites is an extract from product data sheets and is for information purposes only. For detailed information please check the most recent version of the relevant product data sheet as published on these websites. In the event of any conflict between product information pages and data sheets or deviations from information provided in the product data sheets on these product information pages, the information provided in the product data sheets shall prevail.


The product status of the product(s) described in the product data sheet may have changed since publication of the data sheet and therefore information in datasheets on product status may be outdated. The latest information on product status is published on the product information pages of the above-mentioned websites.


As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors, which will be used in future data sheets together with new contact details. In data sheets where the previous Philips references remain, please use the new links as shown below.


http://www.philips.semiconductors.com use http://www.nxp.com
http://www.semiconductors.philips.com use http://www.nxp.com (Internet)
sales.addresses@www.semiconductors.philips.com use salesaddresses@nxp.com (e-mail)

The copyright notice at the bottom of each page (or elsewhere in the document, depending on the version)
- © Koninklijke Philips Electronics N.V. (year). All rights reserved -
is replaced with:
- © NXP B.V. (year). All rights reserved.-


If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or phone (details via salesaddresses@nxp.com). Thank you for your cooperation and understanding.