SSTU32866

General description

The SSTU32866 is a 1.8 V configurable register specifically designed for use on DDR2 memory modules requiring a parity checking function. It is defined in accordance with the JEDEC JESD82-7 standard for the SSTU32864 registered buffer, while adding the parity checking function in a compatible pinout. The JEDEC standard for SSTU32866 is pending publication. The register is configurable (using configuration pins C0 and C1) to two topologies: 25-bit 1:1 or 14-bit 1:2, and in the latter configuration can be designated as Register A or Register B on the DIMM.

The SSTU32866 accepts a parity bit from the memory controller on its parity bit (PAR_IN) input, compares it with the data received on the DIMM-independent D-inputs and indicates whether a parity error has occurred on its open-drain QERR pin (active-LOW). The convention is even parity, that is, valid parity is defined as an even number of ones across the DIMM-independent data inputs combined with the parity input bit.

The SSTU32866 is packaged in a 96-ball, 6 x 16 grid, 0.8 mm ball pitch LFBGA package (13.5 mm by 5.5 mm).

Features

• Configurable register supporting DDR2 Registered DIMM applications
• Configurable to 25-bit 1:1 mode or 14-bit 1:2 mode
• Controlled output impedance drivers enable optimal signal integrity and speed
• Exceeds JESD82-7 speed performance (1.8 ns max. single-bit switching propagation delay; 2.0 ns max. mass-switching)
• Supports up to 450 MHz clock frequency of operation
• Optimized pinout for high-density DDR2 module design
• Chip-selects minimize power consumption by gating data outputs from changing state
• Supports SSTL_18 data inputs
• Checks parity on the DIMM-independent data inputs
• Partial parity output and input allows cascading of two SSTU32866s for correct parity error processing
• Differential clock (CK and CK) inputs
• Supports LVCMOS switching levels on the control and RESET inputs
• Single 1.8 V supply operation
• Available in 96-ball, 13.5 x 5.5 mm, 0.8 mm ball pitch LFBGA package

Products/packages

Pricing/ordering/availability

Applications

• DDR2 registered DIMMs desiring parity checking functionality

Block diagrams/pinning

Design support

Support Documents

75014354; Memory interface selection guide Support logic for memory modules and other memory subsystems (2005-06-01)

75014345; SSTU32864/5/6 and PCKU877/8 Complete register and PLL solutions for DDR2 (2005-06-01)

Parametrics/similar products

Similar products
SSTU32866 links to the similar products page containing an overview of products that are similar in function or related to the type number(s) as listed on this page. The similar products page includes products from the same catalog tree(s), relevant selection guides and products from the same functional category.

Print / Email

• Print this information
• Email this information

Disclaimer

The information published on product information pages of the www.nxp.com or www.semiconductors.com websites is an extract from product data sheets and is for information purposes only. For detailed information please check the most recent version of the relevant product data sheet as published on these websites. In the event of any conflict between product information pages and data sheets or deviations from information provided in the product data sheets on these product information pages, the information provided in the product data sheets shall prevail.

The product status of the product(s) described in the product data sheet may have changed since publication of the data sheet and therefore information in datasheets on product status may be outdated. The latest information on product status is published on the product information pages of the above-mentioned websites.

As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors, which will be used in future data sheets together with new contact details. In data sheets where the previous Philips references remain, please use the new links as shown below.

http://www.philips.semiconductors.com use http://www.nxp.com

http://www.semiconductors.philips.com use http://www.nxp.com (Internet)

sales.addresses@www.semiconductors.philips.com use salesaddresses@nxp.com (e-mail)

The copyright notice at the bottom of each page (or elsewhere in the document, depending on the version)
- © Koninklijke Philips Electronics N.V. (year). All rights reserved -
is replaced with:
- © NXP B.V. (year). All rights reserved.-

If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or phone (details via salesaddresses@nxp.com). Thank you for your cooperation and understanding.