The NXP® MC33883 is an H-bridge gate driver (also known as a full-bridge pre-driver) IC with integrated charge pump and independent high and low side gate driver channels.
- The gate driver channels are independently controlled by four separate input pins, allowing the device to be optionally configured as two independent high side gate drivers and two independent low side gate drivers
- The low side channels are referenced to ground. The high side channels are floating
- The gate driver outputs can source and sink up to 1.0 A peak current pulses, permitting large gate-charge MOSFETs to be driven and/or high pulse-width modulation frequencies
- Linear regulator providing a 15 V typical gate supply
製品詳細
Features
Key Features
- VCC operating voltage range from 5.5 V up to 55 V
- VCC2 operating voltage range from 5.5 V up to 28 V
- CMOS / LSTTL compatible I / O
- 1 A peak gate driver current
- Built-in high side charge pump
- Under-voltage lockout (UVLO)
- Over-voltage lockout (OVLO)
- Global enable with <10 μA Sleep mode
- Supports PWM up to 100 kHz
- Parallel interface and input control
- 4 channels
- Load current (IL) 1 A (Typ)
- Drain-to-source on resistance 1000 mOhm RDS(ON) (Typ)
部品番号： MC33883HEG.
設計・リソース
エンジニアリング・サービス
NXPから直接サポートを受けるには、以下のサイトをご覧ください。 エンジニアリング・サービス.
2 エンジニアリング・サービス
-
インディペンデントデザインハウス (IDH)
Hardware/Software Engineering Services
-
インディペンデントデザインハウス (IDH)
Hardware Engineering Services
本製品をサポートするパートナーの一覧は、 パートナーマーケットプレイス.